Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

How to Replace Flymo Switch Box Levers

Accidentally snapping or breaking the levers on your Flymo lawnmower's handle during use is an all-too-common mishap. Fortunately, you can replace these levers at home by yourself, as long as you know which steps to take. In this article, we're going to show you how to replace Flymo levers on a Flymo lawnmower so you can get your appliance up and running again in no time.

Safety first!

Remember, you should always switch off and disconnect your appliance from the mains before carrying out any work, replacements or repairs.

How to replace Flymo levers on a Flymo lawnmower step by step

Let's get started! To learn how to replace the levers on a Flymo lawnmower, either watch the video or simply follow our step-by-step guide below.

Step 1: Remove the switch box

First, you're going to want to remove the switch box. Using a Torx head screwdriver, unscrew the two screws at the top of the switch box that keep it connected to the lawnmower's handle.

Using A Torx Head Screwdriver To Unscrew The Two Screws At The Top Of The Lawnmower Switch Box

Once the screws have been removed, you can open up the end of the switch box and pull it away from the handle.

Opening Up The End Of The Switch Box And Pulling It Away From The Handle

Step 2: Open the switch box

Next, you'll need to open up the entire switch box to remove the levers. Using the Torx head screwdriver again, unscrew the two screws located near the bottom of the switch box. With these removed, you'll be able to open it up.

Using A Torx Head Screwdriver To Unscrew The Two Screws Located Near The Bottom Of The Switch Box

Step 3: Replace the levers

With the switch box opened, you'll be able to see how the levers are positioned inside. Remove the old levers and replace them with new ones in the same position. The levers can go in either way around and they will simply slot into place. Also, if you found that the old levers used springs, you can simply discard these as the new ones won't require them.

Removing The Old Levers And Replacing Them With The New Levers In The Same Position

Step 4: Reassemble the switch box

Now that you have your new levers in place, go ahead and reassemble the switch box. Close it back up, then return the two screws at the bottom which hold it together.

Closing The Switch Box Back Up And Returning The Two Screws At The Bottom Which Hold It Together

Step 5: Reattach the switch box

Finally, reattach the switch box by closing it over the handle and screwing it back into place with the two screws you removed at the beginning of the process.

Reattaching The Switch Box By Closing It Over The Handle And Rescrewing It Back Into Place WIth A Torx Head Screwdriver

And that's all there is to replacing Flymo levers on a Flymo lawnmower! Your lawnmower should now be back in great shape and working properly once again.

While you're here, it's also important that you know how to properly care for your lawnmower as well as repair it when necessary. Check out our article on how to clean your lawnmower so you can keep your appliance in great shape and working optimally for longer!

Before you go, don't forget to sign up to our mailing list below for more information on appliance care, repairs and all other things eSpares.

Print Article Print this article