Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

How to Replace the Door Glass on a Bosch Washing Machine

If the glass on your washing machine door has become cracked or damaged, it could end up leaking or be dangerous and need to be replaced. In this article, we're going to run you through replacing the door glass on a Bosch washing machine with our step-by-step guide.

Safety first!

Before you begin, make sure your washing machine is switched off and unplugged from the mains.

Replacing the door glass on a Bosch washing machine step by step

Let's dive right in. To learn how to carry out this replacement, either read our step-by-step guide or watch the tutorial video below.

Step 1: Find the correct door glass for your model

To make sure you purchase the correct replacement glass for your washing machine door, you're going to need to find out the model number and details of your appliance. These can usually be found on the inside of your washing machine door or on the removable kickplate panel at the bottom of the appliance. If you can't find it here, check the side or the back of your washing machine. The model number usually consists of a combination of letters and numbers and could also include characters such as a dash (-) or a slash (/).

Find out the model number and details of your appliance.

Step 2: Note the position of your door glass beforehand

Before you start the replacement, you should note the shape and position of the door glass. This is to make sure you fit the new one in the correct position too. The model pictured below, for example, has a bulb shape at the bottom on the inner side. It's worth taking a photo of the positioning before you begin to refer back to it later.

Make a note the position of your door glass beforehand.

Step 3: Remove the door assembly

To start the replacement, remove the two screws that hold the hinge and door assembly in place using a Torx head screwdriver. Once the screws are removed, carefully lift the door assembly away.

Remove the door assembly.

Step 4: Remove the screws from the door

Place the door on a flat surface. Then remove all of the screws around the inside of the door, including the screw that's hidden beneath the sticker. This will allow you to separate the two halves of the door and access the door glass.

Remove the screws from the door.

Step 5: Remove the hinge

Once the screws are removed, lift out the door hinge.

Lift out the door hinge.

Step 6: Separate the inner and outer door panels

To separate the two panels, place the door upside down and let the inner door drop down.

To separate the two panels, place the door upside down and let the inner door drop down.

You can then remove both the outer door panel and the glass cover on top of the door glass.

Remove both the outer door panel and the glass cover on top of the door glass.

Step 7: Replace the door glass

Making sure you take note of the position of the door glass. Again, take a photo if this helps. Then, lift off the frame.

lLift off the door frame.

Next, remove the old glass and replace it with the new door glass, using the photo of the positioning for reference.

Remove the old glass and replace it with the new door glass,

Step 8: Refit the door glass cover and panels

Put the frame and glass cover back into place on the new door glass.

Put the frame and glass cover back into place on the new door glass.

Then refit the outer door panel back into place on top of the glass and lift up the inner door panel.

Refit the outer door panel back into place on top of the glass and lift up the inner door panel.

When lifting up the inner door panel, make sure the catch goes through the hole correctly.

When lifting up the inner door panel, make sure the catch goes through the hole correctly.

Step 9: Refit the hinge

Turn the door back over and refit the hinge back between the panels.

Refit the door hinge.

Step 10: Refit the screws

Return all of the screws you removed from the door earlier and screw them back into place.

Refit the screws to the door.

Step 11: Refit the door to your washing machine

To refit the door, screw the hinge back into place on the washing machine.

Refit the door to your washing machine.

And there you have it - how to replace the door glass on a Bosch washing machine! We hope this guide helped you carry out this replacement and get your washing machine up to scratch again.

A cracked or damaged door glass is just one of many possible faults a washing machine can run into. If your washing machine is damaged, faulty or not working properly, don't fret. Just head over to our Washing Machine Repair Help & Advice Centre so we can help you identify and fix any problems your appliance might be suffering from! To see our complete range of washing machine parts, click here

While you're here, don't forget to also subscribe to our mailing list below. By doing so, you'll be kept in the loop with all things eSpares, including helpful advice, exclusive offers and new products. Happy repairing!

Print Article Print this article