If the door handle on your Bosch washing machine is cracked or broken and this is making it difficult to open the door, it will need to be replaced. In this article, we will take you through how to replace the door handle step by step.
Safety first!
Make sure you disconnect your appliance from the mains before starting this repair.
How to replace the door handle on a Bosch washing machine step by step
So let's get started. Take a look at the how-to video or follow the step by step guide below. You can find a replacement door handle for your Bosch washing machine on our online shop.
Step 1: Find your model number and details
To make sure you purchase the correct replacement handle for your washing machine, you're going to need to find out the model number and details of your appliance. These can usually be found on the inside of your washing machine door or on the removable kickplate panel at the bottom of the appliance. If you can't find it here, check the side or the back of your washing machine. The model number usually consists of a combination of letters and numbers and could also include characters such as a dash (-) or a slash (/).
Step 2: Note the door glass position
It is important that the door glass on your washing machine looks the same after you have finished the repair. Before you do anything, take a photo of the door glass so you can refer back to it later.
Step 3: Remove the door hinge screws
Locate the two screws that go through the door hinge into the cabinet. Then, remove these with a Torx head screwdriver. When these are removed, you can remove the whole door assembly from the machine.
Step 4: Remove the door screws
Place the door assembly on a flat surface. Then remove all the screws from the door, including the one that is hidden behind the sticker.
Step 5: Remove the hinge
When all the screws are removed, lift up the inner panel slightly and gently pull the door hinge away.
Step 6: Separate the inner and outer door panels
Next, you'll need to flip the door assembly over and let the inner door panel drop down. You can then lift up the outer door panel to remove it.
Step 7: Remove the pin and spring assembly
Put the glass and the inner door panel to one side. Now, on the outer door panel, you'll need to remove the pin and spring assembly. To do this, use a flat-headed screwdriver to loosen it underneath.
Then, push the catch forward to release it and remove.
Step 8: Remove the door handle
To release the door handle, lift up the outer panel slightly and angle the handle out.
Step 9: Fit the new door handle
Fit the new handle in place of the old one. Make sure that the bars on either side are locked into place. The new door handle should then click into place.
Step 10: Refit the pin and spring assembly
To refit the pin and spring, you'll need to make sure that the metal piece fits underneath the clasp shown below.
You'll also need to make sure that the white plastic tab attaches to the inside of the plastic as shown below.
The pin and spring assembly should then look like this:
Step 11: Refit the outer and inner door panels
Refer back to the image you took of the door assembly earlier on. Position the glass and the inner and outer door panel in the correct place. Then, refit the outer panel onto the assembly and lift up the inner panel. Make sure that the hole for the door catch wraps around the catch itself.
Step 12: Refit the hinge
Flip the door over and refit the hinge by lifting up the inner panel and placing it into position.
Step 13: Refit the screws
Refit all the screws around the door.
Step 14: Refit the door
With all the screws in place, you can now refit the door to your washing machine. To do this, slot it back into place and refit the screws that were previously taken out.
Step 15: Test!
Close and open the door to make sure the new door handle is working as it should before you use the machine.
So there you have it, how to replace the door handle on your Bosch washing machine. We hope this has helped you get your appliance back up and running again!
Caring for your washing machine
You can help prevent faults from developing in your washing machine by performing regular care and maintenance tasks. One of these is to regularly use a washing machine cleaner and descaler. This will remove and prevent limescale and detergent build-ups that can be harmful to your appliance. It's also a good idea to give the inside of your washing machine and rubber gasket a wipe down and check for any debris that could have fallen from clothing and cause damage.
If you find your washing machine experiences any future issues such as strange smells, loud noises or other damaged parts, you can head over to our Washing Machine Repair Help & Advice Centre for help with diagnosing and fixing your appliance. For all other brands of washing machines and spares, see our full range here.
While you're here, don't forget to also subscribe to our mailing list below to stay up-to-date with new videos on fixing, maintenance and cleaning tips as well exclusive offers and discounts.
Print this article