The role of the mains filter in your tumble dryer is to prevent interference from the motor affecting your other appliances. If your tumble dryer is tripping the electrics when you connect the power, it could be due to a faulty mains filter. If you need to replace the mains filter for your tumble dryer, then you will be pleased to know that you have come to the right place!
If you are unsure where to start there’s no need to panic. We’ll talk you through how to successfully replace the mains filter without damaging your tumble dryer.
This video shows an example on how to remove or replace the part on a typical machine, some models may be slightly different but the procedure should be similar.
What you will need:
Step 1 - Safety First
Safety First! Please make sure that you have switched your appliance off at the mains before starting your repair.
Step 2 - Remove The Upper Lid And Unscrew The Mains Filter
Well we need to get to the mains filter don’t we...so start by taking off the top of the machine by removing the screws at the rear. You can remove the mains filter by removing the holding screws at the back.
Step 3 - Release The Mains Filter
Time to have a little inspection of the filter now! There are a few signs to look out for that would indicate that there is an issue with the mains filter - these would include bulges on the outside, burn marks, liquid on the bottom of the filter and signs of smoking on the bracket.
To take out the mains filter you need to remove the electrical connectors from it (take note of how they are connected, with the “L” and “N” indicators)
Step 4 - Check The Electrical Connectors Before Fitting
OK here we go then - let’s get that new mains filter fitted…the new mains filter you have might look different in appearance to your old one, so when you attach the electrical connectors just make sure that they are connected correctly with regards to the “L” and “N” indicators.
Step 5 - Attach The Mains Filter
With the electrical connectors now in place, you can screw the mains filter to the back panel, followed then by reattaching the top. There you go - all done!
Congratulations - you have now successfully been able to replace the mains filter on your tumble dryer! With a little help from eSpares you can now get back to quickly drying your clothes again.
Want To Give Your Tumble Dryer Some Loving Care?
If you really want to get the best performance from your dryer, and better results for your clothes, then look no further than these energy saving tumble dryer balls - providing a natural, eco-friendly alternative to fabric softeners (ideal for delicate or sensitive skin). When placed in your tumble dryer their square tips compress and soften fabrics, reducing drying time by up to 25%.
Need To Locate The Correct Mains Filter For Your Tumble Dryer?
Repairing your tumble dryer mains filter yourself can save you a lot of money and time. Here at eSpares, we have a wide-range of replacement tumble dryer mains filters for you to select from - so you can soon be on your way to repairing it yourself.
If you need any other help for your appliances you can find more videos from Mat and the team at eSpares, who are always on hand with appliance repair advice in your time of need.
Print this article