Answer this Question (2 Answers)

• You need to take all the door out of the machine, But remember to take pictures of the assemble before doing it! specially when you open the door. Door out of the hinge that keep it on the washing machine. 2-The door have a lid, that you need to open. Once it is open take a picture before taking anything out!, really you need to do that!. Good luck! By goofy210668 - Edinburgh - 22 February 2010
• Open door, remove small phillips screws from inside of door plate. pull front plastic door away from glass anr rear section (door partly closed to allow seperation at hinge point)Handle assemblly is located in removed section. Using small screwdriver slide locating pin down and remove with longnose pliers. Slide out door handle and spring from front of door panel taking note of position and location of spring and catch direction. Remove and replace following directions in reverse making sure you have tension on the spring before sliding pin through all parts ribed end of pin last. (good luck) By ces45 - dundee - 13 March 2009