Answer this Question (3 Answers)

• yes it is supplied with both belts , i fitted the belt over the roller then reinserted the far end of the roller bar into the caseing then using a certain amount of force located the end nearest the belt. By mrmboy - bognor regis - 21 April 2010
• yes both are fitted By Anonymous - Reading - 23 March 2010
• The clutch assembly has both belts fitted. The brush belt can be fitted without the special tool but it is difficult. You can hook the belt with a screwdriver shaft and pull it up but you have to have very strong fingers and a high pain threshold. Be very carefull or you might break something. If you can get hold of the belt tool then use it. If i was to do it again i would make up a tool or buy one as there is a risk of damaging the roll, the casing or my fingers. Take care. By Martini2 - Somerset - 03 March 2009