The wiring I have on my energy regulator for my Belling db90 oven
I have purchased a new energy regulator, Stoves stock no ES642989, from you but am having trouble sorting out the wiring. On the old regulator I had 4 connections - 1 large wire in a red sleeve was connected directly into the regulator. - 1 white lead connected to terminal F - 1 white lead to terminal G - 1 blue lead to terminal H Which terminals do these wires fit onto the new regulator with your website saying the following: P1 = line(supply) P2 = Load B 9one element supply) S2 = pilot or indicator 2 = Load A ( 2nd element supply) 4 = Neutral I wired as follows but tripped the elctrics: P1 = Red P2 = White S2 = Blue 2 = White I have no neutral. Can you help?
Answer this Question (1 Answer)
-
Chris at eSpares says...
The large wire in a red sleeve should be the supply live and connect to P1. The two white connectors are load A and load B they connect to P2 and 2 connectors. The final blue wire connects to terminal 4. Before reconnecting the supply measure between live and neutral as you turn the oven control on and confirm there is a resistance of between 20 and 50 ohms and no resistance to earth under 2,000,000 ohms. if this is ok then reconnect the power to test fully.
Oven Energy Regulator Invensys MP-V01-SVM Stock Number: ES642989
Genuine spare part for select models of Stoves, Belling and New World ovens
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices