Neff U1161 wiring to element
When I pulled the old duff element out, there was no spade attached to one side of the element, but two wires connected to each of two spades coming through the hole. One spade was attached to the element. I can't be sure whether the other spade was connected to the other leg of the same element connection or was actually free, and might have been connected to the other side of the element originally. I don't recall having to pull it off the element connector. There is insulating material in the hole where the element connections go through which meant the element didn't `dangle free' when the screws were removed. This material was hanging around the connections and may have pulled off one of the connections. Is it likely that these spades are actually one for each side of the element, or must I get the whole thing out to look from the other side?
Answer this Question (1 Answer)
-
eSpares Staff at eSpares says...
If one of the electrical connection has dropped off the element you will have to remove the oven to get the back panel off to gain access to the wiring, make sure the oven is disconnected before you attempt this.
Fan Oven Heater Element - 2300W Stock Number: ES655398
Spare part suitable for select models of Bosch, Neff and Siemens ovens
Q&A tips & guidelines
-
Focus on the features or function of the product
-
Write your question in clear English
-
Be polite! Profanity won't be approved
-
Don't include personal info
-
Don't name other websites
-
Don't mention product prices