Tumble Dryer Front Drum Bearing Pad Stock Number: ES101236
Genuine Spare Part for select models of Ariston, Cannon, Creda, Crusader, Electra, English Electric, Hotpoint, Indesit, Jackson, Parnall, Proline and Thorn tumble dryers
Manufactured by Creda
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Tumble Dryer Front Drum Bearing Pad
If you are in need of a replacement drum bearing pad, look no further as eSpares have just the part you need here. Why struggle with a faulty drum when you can grab this handy replacement and get your dryer working like new again.
This drum bearing pad fits select models of Ariston, Cannon, Creda, Crusader, Electra, English Electric, Hotpoint, Indesit, Jackson, Parnall, Proline and Thorn tumble dryers.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
This is Creda Spares reference: X245624
4 Questions and 4 Answers
-
Chris at eSpares says...
One, if you require 4 and the bearing see Stock Number: ES1562106
- Four bearing pads are fitted to this unit, they positioned on the front panel behind the glass door. You will have to first unplug the unit from the mains, then remove the top by undoing the back screws, the next thing is to remove the front panel. This is held by screws on the top of this panel, you will have to remove two screws, remove two screws which hold on plastic front panel (these screws are on the inside, be careful not to loose them). Having done this remove the bottom screws of the door panel and then gently remove the front door panel. The bearings are located on the bottom part where the drum sits, remove the old bearings and fit the new ones. Fit one end of the in the closed hole and slide the bearing side ways so it slides into the open hole and then Bobs your uncle. Reassemble the unit enshuring the vent pipe is correctly located and the belt is in line (using tape helps to locate the belt on the drum) Hope this is of help Moses
-
Rory at eSpares says...
Hi bob, my mistake in the previous answer. There is one bearing pad per 'set'. To order four, simply change the quantity at the basket page to 4. The pads clip in to place, no adhesive needed.
Will this part fit my appliance?
Check Now
