Fan Oven Element - 2500W Stock Number: ES1019719
High quality spare part for select models of Stoves, Belling, Cannon, Creda and Hotpoint ovens
Manufactured by Electruepart
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
High Quality Replacement Fan Oven Element - 2500W
The function of the fan oven element is to heat the oven cavity. When the cooker knob is turned on for your electric cooker, electricity will flow to the element which then proceeds to heat up. Once the element reaches the desired temperature, the electricity flow switches on and off to maintain the temperature.
If the internal element filament burns out, this can cause the element to short circuit - and will lead it to fail. Potential signs that the element has blown can be visual things, such as a split, bulge, or blow hole on the element.
eSpares has the replacement fan oven element, that could soon be yours, to help get your fan oven back to the required temperature - so you can continue to make your delicious meals!
Specification:
- 2500 watts
- Height: 235mm
- Width: 255mm
- Bracket: 70mm
- Tags: 38mm
- 2 Turn
- End to centre bracket: 220mm
Compatible spare part for select models of Stoves, Belling, Cannon, Creda and Hotpoint ovens.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
13 Questions and 13 Answers
My oven is built in. Can I just switch off at mains to replace element
-
Dean at eSpares says...
Hi Sylvia, always make sure that the oven is turned off at the mains before replacing the element
Creda C261ew Control knob in off position Oven is still on and when door shut, fan spins also. Turning off at mains and fuse board for period of time doesn't seem to clear the problem either
-
Chris at eSpares says...
Examine the switch (ES836013) contacts for damage or burning and replace if required. If the switch is OK suspect the thermostat ES188322
Creda Cordialle oven 48243 - the grill works but the main oven will not heat up. The power light does not light up on the oven console. Is the fault likely to be the element or thermostat/control panel. Thanks. 1 Answer
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: www.espares.co.uk/advice/1/2145
all cooker works apart from oven dosent get very warm.was working and then had power cut.now not very hot
-
Chris at eSpares says...
For information on your repair see our video: How to diagnose problems with your oven: http://www.espares.co.uk/advice/1/2145
Is it possible to remove the door on a indesit fiu201x built in oven to aid new heating element installation?. 1 Answer
-
Chris at eSpares says...
To remove the door lift up the hinge locking catches as shown in our video: http://www.espares.co.uk/advice/1/2754 Then with the door open hold either side and use your thumbs to push the hinge sprung arms as you lift the door and the bottom latch plates away from cavity and unhook the arms as you lift away.
Will this part fit my appliance?
Check Now
