Washing Machine Door Seal Stock Number: ES1089810
Spare part suitable for select models of Indesit, Ariston, and Hotpoint washing machines
Manufactured by Original Quality Component
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Door Seal
If you have just come to remove the washing out of the washing machine, to find that water has leaked out of the machine, it sounds like it could be a faulty door seal. eSpares can help you solve the problem and prevent further accidents with this replacement spare door seal.
We can soon help to get you back to having confidence that when you put the washing on, the water will remain on the inside of the appliance - and not on your floors. With help from eSpares, and our replacement door seal, you will soon have a fully working washing machine again - so you can get through the laundry that has piled up!
Spare part suitable for select models of Indesit, Ariston, and Hotpoint washing machines.
Please check the suitable model fit list to ensure that this is the correct part for your appliance.
5 Questions and 5 Answers
I've just watched video regarding replacing door seal, Looking at my washing machine door seal the outer part is quite solid almost like a hard rubber yet in the videos it looks reasonably easy to fold inside the drum. I haven't attempted to remove retaining clip yet though, is it that which makes it quite firm?
-
eSpares Staff at eSpares says...
The door seal is fitted to the cabinet by a band which does make the seal appear solid, once the band has been removed the seal will be more flexible and will fold into the drum.
Just successfully replaced seal on my Hotpoint HE8L 493 WM using your part and very helpful video. Turned machine back on at mains to test it, power comes in and lights up as usual but whichever programme I choose it just stops less than a minute into whichever cycle it's on. Have I somehow confused the controls by stopping the machine mid -cycle (when it was leaking ) and then turning off from mains to do the job? How do I reset it? Also drum feels very stiff in new seal but not sure if that's how it's meant to be.
-
eSpares Staff at eSpares says...
The drum should not be stiff unless it is rubbing on the new seal so check if it is fitted correctly, we have a vide to help www.youtube.com/watch?v=QYPqpjLV7s4&t just copy and paste into your browser.
-
Chris at eSpares says...
The old seals retaining clips can be re used on the new seal.
Should there be a hole in the rubber door seal of an undesirable washing machine IWB5123UK? 1 Answer
-
Chris at eSpares says...
There is usually at least one drain hole at the bottom to allow water to empty from the bellows fold back to the drum.
-
Chris at eSpares says...
We have updated the video on this part to show how to deal with this problem.
Will this part fit my appliance?
Check Now
