Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

Dishwasher Heating Element - 1800W Stock Number: ES1250400

Spare part for select models of Beko, Diplomat, Amica, Teka, Blomberg and Howden dishwashers

Read more

Manufactured by Beko

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Dishwasher Heating Element - 1800W

If the water in your dishwasher is not to its usual warm level, there could be a faulty element. If your water is not hot, it will result in a poorer cleaning performance, and your dishes and cutlery will not come out as clean as you would expect.

eSpares has this replacement heater, that could soon be yours to restore the water temperature - and great cleaning results - that you have been used to.

Specification:

  • 1800 Watts
  • Type: Flow-through 
  • 230 Volts
  • Length: 145 mm

Spare part for select models of Beko, Diplomat, Teka, Blomberg and Howden dishwashers. 

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Ask a Question

13 Questions and 11 Answers

By Mark - - 02 April 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    You would normally replace with the existing clips on the machine if you need to replace they are available on our website.

Answer this question

Dishwasher does full cycle but is cold no heat how do you test the go through heater element the other type of element you do a low resistance test on each end.

By David - WALLASEY - 25 January 2017
  • Chris from eSpares
    Chris at eSpares says...

    Measure with a multi meter across the two connections there should be a resistance of under 30 ohms.

Answer this question
By Alison Milligan - workington - 20 December 2016
  • Chris from eSpares
    Chris at eSpares says...

    The problem is likely to be the heating element failing.

Answer this question
By Christopher Grady - Belfast - 23 February 2016
  • Chris from eSpares
    Chris at eSpares says...

    For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems www.espares.co.uk/advice/3/2083

Answer this question

Hi my DSFN 1534s Beko dishwasher is working the wash cycle as normal but has stopped on the end of wash and the drying and end lights never come on any more :/ which part do I need to replace please? I know it's hot air but can't seem to find the relevant part :( thanks

By Stacey - Ashford Kent - 23 July 2015
  • Chris from eSpares
    Chris at eSpares says...

    For information on this problem see our diagnosis video How to Diagnose control and programme problems with a dishwasher: http://www.espares.co.uk/advice/3/1985

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Dishwasher Heating Element - 1800W

43.06
(inc. VAT)
43.06