Over 1 million spare parts
Over 500 brands
Over 800 appliance repair videos
Over 9,000 Trustpilot reviews
Refrigerator Dispenser Lever Assembly Stock Number: ES1569343
Genuine spare part for select models of Samsung fridge freezers
Manufactured by Samsung
(This part fits select models)
Will this part fit my Appliance?
Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number? Here's how
Check this part fits your appliance
2. Enter your model number
Refrigerator Dispenser Lever Assembly
Sit back, relax, and don't worry about the broken dispenser lever in your refrigerator. If it's damaged, just order a replacement.
Genuine spare part for select models of Samsung fridge freezers.
Please view these before purchase to ensure this spare is suitable for your refrigerator.
Ask a Question
1 Question and 2 Answers
How do I remove the control panel to facilitate the removal & refitting of the lever assembly. 2 Answers
- Just bought this part from espares - brilliant store. Here's how I did it: Look on the bottom side of the dispenser underneath the control panel, and you will see a screw. Remove it and pull out the control panel - The left side will come out easier (your left). Don't worry if the fascia seems to separate and leaves the buttons behind - the fascia is just a piece of adhesive-backed plastic and will push back into place afterwards. If you have had to remove the fascia, you can also remove the silver plastic trim at the top of the panel - this will snap back into place afterwards. Keep pulling out on the left side of the control panel, whilst pulling the right side of the panel to the left - it should come away. There are a good few inches of wiring so there's plenty of play. The top of the lever mechanism has two tabs, on the left and right. Release them and the mechanism will come away from the housing. You can then replace it with a new one and reverse the above process to put it back together.
-
Chris at eSpares says...
The display panel is normally pushed and 'clicks' into position. To remove it use wide flat edges like a credit card or paint scraper. It is difficult to prise away with enough force without marking the display or surround.
Will this part fit my appliance?
Check Now
