Washing Machine Drum Bearing & Seal Kit Stock Number: ES660591
Genuine spare part for select models of Indesit, Hotpoint and Ariston washing machines
Manufactured by Indesit
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Washing Machine Drum Bearing and Seal Kit
Are you hearing strange crunching noises from your washing machine during the wash cycle? This could be the grinding of the bearings and points to the potential need of new bearings for the drum in the machine. With the help of eSpares, and this replacement bearing, we could soon help get your washing machine performing back to its best performance again.
Specification:
- This kit comprises of 2 bearings and 1 seal
Genuine spare part for select models of Indesit, Hotpoint and Ariston washing machines.
Important - Please check the list of suitable models, and the size specifications, to ensure that this spare part will fit your appliance.
4 Questions and 6 Answers
- The bearings are pre-packed and do not require grease.
- The bearings are pre loaded with grease but a smear of lithium grease can be used to ease fitting into the spider
Are fitting instructions included or do I need a factory manual?
- Fitting instructions are not included however all you need to do the job is a pozi-drive scewdriver, a steel punch, a T40 Torx adaptor and accommanying rachet and a hammer shaft to lock the drum when removing the drive pulley. 1) Remove the back access panel, (6 screws) 2) Remove the drive belt, (no tools req'd) 3) Remove the drive pulley. 4) Remove x 8 spider Torx screws and lever spider off.. 5) Drive bearings out and refit in reverse order.
-
Rory at eSpares says...
Hi Kiwimark, this link may help you: http://www.flickr.com/photos/wapster/sets/72157606247211061/
Looking for bearing kit for Hotpoint washer/dryer, BWD12 but your site lists at least three sets with different part numbers. Are they different diameters? How can I tell prior to dismantling the machine? 1 Answer
-
Chris at eSpares says...
The drum shaft will need to be measured as there are two different sizes that may have been fitted to your model.
-
Chris at eSpares says...
The drum on your machine is not repairable as it is welded together and cannot be parted and re sealed after bearing replacement. It is likely to be cheaper to have a fixed price repair with Repaircare than replace the drum unit Stock Number: ES871622
Will this part fit my appliance?
Check Now
