Get The App From Play Store!

Skip to main content

Tumble Dryer Microswitch & Lever Stock Number: ES832822

Genuine spare part for select models of Indesit, Ariston and Hotpoint tumble dryers

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Tumble Dryer Microswitch & Lever

If the microswitch that fits into your dryer has become faulty, no longer working as it should, don’t fret because eSpares is here to help! This replacement switch and lever can be fitted into your appliance to help restore it to its former glory.

Genuine spare part for select models of Indesit, Ariston and Hotpoint tumble dryers.

Please check the suitable model fit list to ensure that this is the correct part for your appliance.

Ask a Question

3 Questions and 3 Answers

Hot point tumble dryer model no tcm580g

By Mark priddey - Wythall , Birmingham - 13 August 2016
  • Chris from eSpares
    Chris at eSpares says...

    The float switch turns on the 'empty water' light and stops the heater only. The pump will run continuously when the machine is running.

Answer this question

the reservoir at the base of dryer over flows, ive fitted a new pump and float but still leaks, does this switch control the float and do you think this will solve my problem

By Gary Gorton - chesterfield - 08 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    Make sure both hoses connect from the pump to the water container housing. Once full excess water is returned to the pump and causes the float to rise and cuts off power to the heater stopping additional water from being removed.

Answer this question

Our tumble dryer rotates and starts to warm clothes as per normal, but seems to turn off before clothes are dry. Would this part have an influence on performance?

By Bavers - Eastbourne - 31 December 2013
  • Chris from eSpares
    Chris at eSpares says...

    This part is used to turn the heater off if the water is not cleared from the reservoir to prevent leaking. This drier will turn the heat off ten minutes before it finishes to cool down. To check the heat set to over twenty minutes and check before it reaches the last ten minutes. Do not 'turned off' without allowing the dryer to run through the cool down cycle.

Answer this question

Will this part fit my appliance?

Check Now

Tumble Dryer Microswitch & Lever

34.47
(inc. VAT)
34.47