Fridge BL-9808 External Water Filter Stock Number: ES860605
Genuine spare part for select models of LG fridge freezers
Manufactured by LG
(This part fits select models)
Will this part fit my Appliance?
Check this part fits your appliance
Fridge BL-9808 External Water Filter
Bring back the refreshing taste of pure water inside your refrigerator. No worries, eSpares may have just the part to solve the problem. This genuine spare filter from LG can be fitted to get your refrigerator performing like new. Enjoying great water doesn't have to be a chore anymore!
Specifications:
- Also Known As: Water Filter Cartridge
- Type: BL-9808 (5231JA2012A)
- PLEASE NOTE: LG May supply a suitable alternative product to your original and may be a lower capacitor than the original
- Replacement cartridge for LG side-by-side refrigerators that use externally fitting cartridges
- Flow Rate: 1.3 lpm
- Operating Pressure: max 862 kPa (125 psi)
- Operating Temperature: min 0.6°C / max 38°C
- Capacity: 2000 litres
- Dimensions: approximately 5 cm x 23 cm
- Designed to be installed on the 1/4" diameter cold water supply line to the refrigerator/icemaker
- LG recommends replacement every 6 months
- Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
Genuine spare part suitable for select models of LG fridge freezers.
Please check the list of suitable models to ensure that this spare part will fit your appliance.
9 Questions and 9 Answers
Is it usual for the first couple of glasses of water to be discoloured after replacing the water filter? 1 Answer
-
Chris at eSpares says...
Yes. You will usually be advised to run water through the dispenser until this clears completely.
I seem to have had another filter fitted to my lg fridge. Can I cut the pipes to replace it/
-
Chris at eSpares says...
Most external water filters either have ends that screw off or push fit connections that have a collar to push toward the filter body that will release the pipe when pressed. If you have plenty of pipe available it is possible to cut the pipe with strong scissors if required.
- I 'cut off' the existing cartridge. The new cartridge comes with screw fit attachments. Put the nuts on the pipework first, heat the ends of the pipe in hot water. Push the warmed ends on to the cone shaped ends of the cartridge, tighten up the nuts. Job done. Always check that the flow arrow is in the right direction.
-
eSparesToby at eSpares says...
Unfortunately we don't seem to have a filter kit for the model of LG fridge you've mentioned. Apologies, we will endeavour to stock it in the future.
Will this part fit my appliance?
Check Now
