Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

Tumble Dryer Heater Element Irca S 9276 845 - 2100W Stock Number: ES956282

Genuine spare part for select models of Hoover, Candy and Maytag tumble dryers

Read more

Manufactured by Hoover

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

Tumble Dryer Heater Element - 2100W

If you're in need of a new element to get your tumble dryer fired up again, this replacement is sure to have your dryer up and running in next to no time. Your clothes will always be fresh and dry whenever you need them.

Specification:

  • 2100 Watts (1050 + 1050)

Genuine spare part for select models of Hoover, Candy and Maytag tumble dryers.

Prior to ordering please be sure to check the model fit list to ensure this part is suitable for your appliance.

Ask a Question

22 Questions and 23 Answers

Candy GOC58F replacement heater element

By Terence - Staines - 04 April 2015
  • Actually there is a much simpler way to do this and it saves time too! It means just take off back panel over heater then carefully thread some strong sewing thread through the sides of the plastic rivet. Make sure you have strong thread and make loops about 20cm long. Then when you gently remove the plastic rivet the thread stays attched. Pull the connectors though and change one by one as before. Now carefully move the cotten loops to the new plastic rivet and gently pull on the loops. as you guide the cable back in. The thread will guide the rivet back into place and pull firmly to secure the rivet. Reassemble as before. Job done!!!! By jon m - cumbria. - 13 November 2016
  • Chris from eSpares
    Chris at eSpares says...

    You will need to remove the following, Lid, control panel, lower front, door and seal, fan grill, fan, fan cover. Then reach through from the front to locate the clip. We have just videoed this repair and will have this in our advice centre and Youtube shortly.

Answer this question

My Candy o Comfort GCC590NB Condenser tumbler is not heating and after a few minutes stops and all lights on the front flash? Any ideas please

By Cheryl - Essex - 24 November 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    You will need to test the element with a multimeter to confirm if it has failed.

Answer this question
By Andy - Glasgow - 28 March 2016
  • Chris from eSpares
    Chris at eSpares says...

    For information to diagnose your problem see our video: How to Diagnose Tumble Drier Drying and Heating Problems: www.espares.co.uk/advice/9/2050

Answer this question

Hotpoint Ultima Wash and dry 5 +5kg Model 31135R Serial no. 703210192 Please help.

By T Bills - Staffordshire - 29 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    You can download a copy of the manual using the address below. http://www.espares.co.uk/usermanual/download?userManualId=3a6e0e45-c295-4e40-92b9-a57e009eb063

Answer this question

I replaced the heat element with a spare from eSpares at the end of October 2015 and gave the machine a good clean. The machine worked great until now...

By Jon - Worthing - 06 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    If when freshly plugged in the light changes when you first press the button then the control panel recognises the press. If this is the case check the door lock.

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

Tumble Dryer Heater Element Irca S 9276 845 - 2100W

53.34
(inc. VAT)
53.34