Vacuum Cleaner Motor - 1000w Stock Number: ES110194
Genuine spare part for select models of Sebo vacuum cleaners
I see you say the 1000w motor should have a different pulley fitted which is supplied. My question is how difficult is it to change the pulley? I've experimented on the old motor and discovered a lot of force is required which wouldn't be good on a new motor.
-
Dean at eSpares says...
We do not have any information on the replacement of the pulley, but this only applies to the X4 extra. Sebo only supplies this part due to the X4 motor being no longer being available.
Looking for Sebo x4 Extra 1300w motor Domel MKM9206-3. Your product No. ES110194 is listed as 1000w. But you include a comment online that the shipment includes a pulley that must be changed to "make it 1300W". But I assume this is not a 1300W motor ? 1 Answer
-
Chris at eSpares says...
The original motor for your model is no longer available, Sebo now supply this motor used on other models with a pulley to allow fitting to your model.
machine is noisy, smells electrical, and brushes and rotor are badly scored. ?new motor?
-
Chris at eSpares says...
Your description suggests a worn or failing motor.
I runs ok then slows then a smell of heat. Its about 17 years old. its 1300w x4 extra. I took motor out. One brush worn more than the other and has curvature of the rotor. It then ran ok for a while and slowed again and now again ok.
-
Chris at eSpares says...
It is possible the motor is damaged but we would try replacement brushes first due to the age of the appliance.
-
Chris at eSpares says...
For information on this repair see our video: How to Replace the Carbon Brushes and Motor on a Sebo X1 Vacuum Cleaner: http://www.espares.co.uk/advice/4/3233
Is it possible to fit the sebo 1000w motor as a replacement into a Sebo X1 which has a faulty 850w motor? 1 Answer
-
Chris at eSpares says...
It may be possible to fit this motor but a word of caution. This other motor is going to produce an extra fifteen per cent heat so this could result in overheating. In practice this should not be an issue as long as the filters are clean or have recently been replaced.
Will this part fit my appliance?
Check Now