Fan Oven Element - 2000W Stock Number: ES209573
High quality spare part for select models of Belling, Servis and Diplomat cookers
How on earth do you undo the screw nuts around the element connection?? they are so small and almost flush against the panel! I cant even undo the nuts on the replancement element you sold me!! 3 Answers
- On the Belling XOU252 you don't unscrew the element from inside the oven as shown on the video you need to take the oven out of the housing and access the ends of those long threaded bolts you see on your replacement element via the back of the oven. thos threaded bolts go through holes in the back of the oven and have nuts screwed onto them from the other side. You need to remove a plate from the rear of the oven by taking out a screw before you can see the electrical connectors and threaded bolts holding the element in place.
- Hi, Thanks, but the new element has nuts with threats on at the point where you need to reconnect the wires! I cannot undo these nuts as they are not thick enough for a fixing nut or pliers! This is the same situation with old element which I cannot remove from the oven! Removing the screws from this part of the element is not covered in your online video. Am I missing something simple and obvious? Please feel free to contact me directly to discuss further. Thanks Pete
-
Rory at eSpares says...
Hi there, you'll need to retain the nuts from your original element - this one doesn't come with the fixing nuts included. They should come away by hand, or with the help of a pliers.
- Yes fits perfect & simple to replace
- yes we have just used the element for this model and it works perfectly
You show two fan elements for my cooker, which one should I buy and why? Here are numbers I found on the cooker that might help. 4289r473, IRCA240v2000W,524022100 and RL8, does these nimbers help?
- All i can tell you is that I ordered the 2000 watt element for my XOU252SS and it works fine - when i spoke with belling they tried to get me to buy a £54 element from them and could not confirm if it was the 2000 or 2100 watt version. I went for the eSpares 2000 watt version and there is no difference!
- yes
I need to replace element on xou 252 but need to take housing out to get behind it how do I do this. 1 Answer
-
Dean at eSpares says...
We believe the oven will be held in by 4 screws going into the cabinet, drop the door down and locate the screws but for more information see the user guide page 6. Remember to disconnect the power before attempting any repair.
The old element is fixed in place with 2 bolts which are a very specific size (5.15mm or 16/34). I cannot remove the old one with any of the socket wrenches I have
-
Chris at eSpares says...
Sorry we cannot find those sizes on our site, we thought the nuts were typically 7 or 8 mm.
-
Chris at eSpares says...
In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
NO SERIAL NUMBERS AT HAND
-
Chris at eSpares says...
In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
-
Chris at eSpares says...
Universal parts can be used on many Appliances but may fit slightly differently to the original. Where possible we recommend using the original part unless you have checked the dimensions match and can make minor modifications if required.
-
Rory at eSpares says...
Hi pete, the first thing to check is that you've definitely been buying the correct element for your cooker, with the correct wattage. If that's all good, it's potentially the thermostat that is damaged, causing the element to overheat and eventually fail - if your food is burning in the oven, this'll definitely be the cause.
Have purchased this element after watching the video of how easy it was to install.......the old element will not just pull away from back of oven after all screws have been removed!! Please HELP!!! 1 Answer
all screws have been removed, it seems to be bolted in (this wasn`t shown on video)
- I have a Belling 252. The video wasn't the same for me either. So after getting the oven out of the unit I had to unscrew the back panel, remove the connectors and then undo the two nuts holding the element in place. If you have done all this the element must be fused on to the oven by use! Just work it loose gently.
Will this part fit my appliance?
Check Now