Tumble Dryer Door Catch Stock Number: ES501182
Genuine spare part for select Electrolux, Tricity Bendix and Zanussi tumble dryers
-
eSpares Staff at eSpares says...
Make sure you take a photo of the catch and spring before take the door off, split the door to get access to the inside and there is a pin going through the catch that you remove to release it.
-
eSpares Staff at eSpares says...
You will need to take the door off and split the door to get access to the door catch, make sure you take a photo of how the catch is fitted before you split the door.
The door retainer part of the door catch has broken on my Zanuzzi TD530 Tumble Dryer which has a porthole door which will not stay closed. How do I gain access to it as the filter surround covers the whole of the interior. Also do you have a new switch and how to fit. Ken Brocklehurst
-
Chris at eSpares says...
The two parts of the door catch are Stock Number: ES952142 and Stock Number: ES185671. We think you can replace these without removing the cabinet.
Please could you post a line drawing of how the whole thing fits together - the video suggested to all other similar questions on this topic is not helpful as it shows a completely different part and has no bearing on this question? thank you
-
Chris at eSpares says...
Although for a washing machine have a look at our video: How to Change the Door Handle on a Washing Machine (Zanussi) http://www.espares.co.uk/advice/7/2913 The door catch is very similar.
Good Afternoon, Do you have any diagrams of how a Tricity TM220W door handle is put together. I have all the part but not sure how the spring it attached.
-
Chris at eSpares says...
We do not have youir specific machine, However for more information see our video: http://www.espares.co.uk/advice/7/1278/how-to-fit-a-washing-machine-door-handle
How does the spring fit back into the Handle/door catch assembly on Zanussi tumble Dryer, Model TD 524? 1 Answer
When fitting the door catch I cannot get the spring into the correct position to make the handle and catch work. The handle is in the right position and so is the catch, but can't remember how the spring should be positioned so it won't work. Could you send me a line drawing of how the spring fits in please? It is driving me dotty. PS Was very pleased I could find the part and it was delivered very fast
-
Rory at eSpares says...
Hi there, check out this video on replacing a catch and latch on a tumble dryer: http://www.espares.co.uk/advice/tumble-dryers/a/9/1285/how-to-replace-a-catch-latch-on-a-hotpoint-dr.html. The dryer in the video is a different brand, but the process should be similar. Best of luck.
Is there a line drawing or picture showing how to fix the spring onto the door catch spindle & handle for a ZanussieTD4112W tumble dryer 1 Answer
-
eSparesMalindi at eSpares says...
Hopefully this video on our website helps: http://www.espares.co.uk/advice/tumble-dryers/a/9/1285/how-to-replace-a-catch-latch-on-a-hotpoint-dr.html
I am having problem in attaching the door catch and need a drawing to how spring is attached for Zanussi TD523 dryer 1 Answer
Zanussi Dryer TD523- I am having problem in attaching the door catch and need a drawing to how spring is attached
-
Rory at eSpares says...
Hi Awadhesh, check this article out for help: http://www.espares.co.uk/advice/washing-machines/a/7/1164/how-to-fit-indesit-washing-machine-door-handl.html
Can you advise correct installation of Catch A drawing would assist - i'm having trouble fitting this replacement item
-
Rory at eSpares says...
Hi Rogert Attached is a line drawing. This part is labelled number 325 and should fit between part 520 (http://www.espares.co.uk/part/tumble-dryers/zanussi/p/1088/332/0/0/546950/catch-flange.html) and part 260 (http://www.espares.co.uk/part/washing-machines/zanussi/p/1085/332/0/0/187092/door-handle-spring.html) with part 563 (http://www.espares.co.uk/part/washing-machines/zanussi/p/1085/332/0/0/187118/door-handle-pin.html) fitting through the hole in the catch and the spring.
Will this part fit my appliance?
Check Now