Karcher Pressure Washer K2-K3 Dirtblaster - DB 120 Stock Number: ES537961
Blast dirt away with your Karcher K2-K3 pressure washer using this rotary nozzle for stubborn dirt on home and garden surfaces
it keeps jumping from left to right.....if its the blaster is wrong i dont mind buying a new one.
-
Dean at eSpares says...
We Believe the Karcher may be pulsating when in use then it is likely the spray lance is restricted as this will increase the pressure as if the machine was stopped and once the pressure drops the machine runs again. Try with a different nozzle before looking for a fault.
NEED TO POWER WASH A THREE STOREY HOUSE, NEED AS LONG A LANCE AS POSSIBLE
-
Chris at eSpares says...
The longest lance is Stock Number ES1583086 Any longer and the nozzle pressure does not allow you to hold it in position forcing it away from the windows.
DOES THIS FIT MODEL 411A
-
Chris at eSpares says...
This should be suitable providing your gun has a detachable spray lance using a bayonet fitting.
I have water spraying from the lance where it fits the gun. This reduces the pressure. How can I fix this? 1 Answer
Karcher 2.56
-
Chris at eSpares says...
If it is not cured by replacing the O rings then you will need a replacement lance.
My mac 2 R08W0402199 requires a new lance; PA66 300F is on side of lance.
-
Chris at eSpares says...
Karcher accessories are not likely to fit without adaption (if adaptor available).
my dirtblaster no longer rotates, but the lance is fine. Can I buy a replacement part for the inside of the nozzle...this is the second nozzle that has given up the ghost, so I now have 2 machines, and two non functioning nozzles, and do not wish to spend 1 Answer
I have tried to dismantle and check it out, and it certainly doesn't look complex, but I am at a loss to know which part has actually worn out...the ball bearing looks fine, the plastic grommet looks OK so I'm guessing its the little rotating thingy, or even that the O ring has compressed too much and puts too much pressure on the ball bearing. Any clues?? The cleaner is used ireegularly for cleaning silk screens, not exactly a heavy duty operation
- have exactly the same problem..Answer from karcher australia...buy the whole dirtblaster not one little plastic part that you actually need.
Hi could you please inform me on what nozzle size is fitted and can you buy a repair kit. regards
-
eSparesMalindi at eSpares says...
We are not provided with these measurements unfortunately. There is also no repair kit available for this spare.