Compatible Dishwasher Heating Element - 2040W Stock Number: ES551432
High quality compatible spare part for select Ariston, Hotpoint and Indesit dishwashers
Machine stops during cycle, water is being heated. So dont think it's the heating element. Is it overheating or is the thermistor faulty / control module?
-
Chris at eSpares says...
For information to diagnose your problem see our video: How to Diagnose Washing Machine Control and Program Problems www.espares.co.uk/advice/7/1793
water does not get hot end of wash leaves grainy residue on dishes and no steam comes out of machine also delicates light flashes at end of cycle hotpoint aquarius fdw60g model 1 Answer
-
Chris at eSpares says...
For information on this problem see our diagnosis video: How to Diagnose Dishwasher leaking and heating problems http://www.espares.co.uk/advice/3/2083/how-to-diagnose-dishwasher-leaking-and-heating-problems
I had a powersurge/powercut when the dishwasher was on. when power back on and my RCD reset the machine is flashing lights 2 and 4. When powering off and on I can reset by holding button P. The machine sounds like it is draining but then stops with lights 2 and 4 flashing again. A google search suggests this is the heater. help please
-
Chris at eSpares says...
If the error lights suggest a faulty heater you should check this and replace if required as the machine may stop if it detects a fault.
-
Chris at eSpares says...
See our diagnosis video: http://www.espares.co.uk/advice/3/2083/how-to-diagnose-dishwasher-leaking-and-heating-problems
the fault on my arisen bfi680 is that it finishes mid way through cycle with the 6th light flashing. the water feels warm but i wonder if it's not hot enough.
-
Chris at eSpares says...
We believe the 'fault code' showing on your control panel is indicating that the machine does not think it has heated correctly. The element resistance is correct and not likely to be the problem. Check the wiring and control board for signs of burning or damage and replaced the board if required.
-
Chris at eSpares says...
We cannot identify the fault code from your description but for more information see our video: http://www.espares.co.uk/advice/3/1985/how-to-diagnose-control-and-programme-issues-with-a-dishw
Dishwasher flashing two green lights. Do we need to change heating element and is there anything else we need to replace also for this problem as the water is overheating. Dishwasher has an earthy smell about it. 1 Answer
-
Rory at eSpares says...
Hi there. With regard to the flashing lights, I can't tell you exactly what the problem is without knowing which lights are flashing. However, if the water is overheating, it sounds like a problem with most likely the thermostat. If it's not the 'stat causing the problem, it'll be the element or the PCB itself. To diagnose part is to blame, test each with a multimeter.
Checked the coil on the unit we have and seems very low
-
Rory at eSpares says...
Hi georgie, the resistance should be about 26 ohms.
Hi, I need a replacement heater element - are you able to supply the connector for this product too? Can you provide code?
-
eSparesMalindi at eSpares says...
Please contact us with your full model details so that we can confirm whether or not this part is available for your appliance.
Will this part fit my appliance?
Check Now