Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

Single Pole Grill Cut Out Microswitch Stock Number: ES836014

Genuine spare part for select models of Ariston, Creda and Hotpoint cookers

Product Q&A

Ask a Question
By david cresswell - Exeter - 20 February 2019
  • eSpares Staff from eSpares
    eSpares Staff at eSpares says...

    The microswitch is located on the outside of the oven on the right-hand side, it is held in by screws that secure it to the cavity.

Answer this question

I recently purchased a new lamp holder from yourselves because I changed the bulb & as I tightened the bulb it arked/sparked. May I say brilliant service, but since this has been replaced the fan will not turn off. The cooker itself seems to be working fine but need to turn main power of to stop the fan. Have you got any advise what part is now at fault. Many Thanks Paul & Su Bradford

By PDB - BS164SQ - 07 July 2017
  • Dean from eSpares
    Dean at eSpares says...

    Depending on the model there may be 2 fans in the oven, this may indicate a switch or thermostat issue, please refer to our video for more help www.youtube.com/watch?v=_lWk22-qvoI

Answer this question
By Noddy - Wales - 04 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    If the switch has Three connections as shown in the picture it is a two way switch. The two wires should be connected across the N O and COM connections as these will close when the door is closed to turn the light on. Fit between the N C and COM to light when the switch is not pressed.

Answer this question
By bill - - 01 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    It is usually necessary to remove the top and back panels to release the sides. The side panels may have additional screws through the door surround at the front that may also need removing.

Answer this question
By Anonymous - - 17 November 2013
  • Chris from eSpares
    Chris at eSpares says...

    It is necessary to remove the right side cover to access this switch. To remove the cover you may have to loosen the hob top and move it to one side.

Answer this question

Will this part fit my appliance?

Check Now

Single Pole Grill Cut Out Microswitch

20.80
(inc. VAT)
20.80