Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

White Washing Machine Door Handle Kit Stock Number: ES209798

Genuine spare part kit for select models of Indesit washing machines

Read more

Manufactured by Indesit

(This part fits select models)

Will this part fit my Appliance?

Does it fit?
Enter your model number and select from the below list
Need help finding your appliance model number?

Check this part fits your appliance

2. Enter your model number

White Washing Machine Door Handle Kit

Every washing machine should have a working door handle. If you're struggling to open and close the door on your washing machine due to a faulty door handle, look no further eSpares have just the spare you need. With this replacement door handle kit we could soon get you back to being able to easily open and close the washer door again!

The kit includes:

  • White plastic door handle
  • Spring
  • Pin
  • Door hook

Genuine spare part kit for select models of Indesit washing machines.

Indesit door handle fixing kit instructions are available via the link.

As with all spare parts please check the list of appliances prior to ordering to ensure that this is the correct door handle kit for your washing machine.

Ask a Question

10 Questions and 12 Answers

Last Monday night, I went out and my boyfriend snapped the handle off the washing machine door. This Monday, I went out and my boyfriend came home from work to discover the new door handle kit had arrived, so took the door apart to fix it and now can't remember how it was put together. Aside from the fact that I clearly need to stop going out on Mondays, please can anyone offer any advice on how to attach this new door handle? Is the pin supposed to go through the latch thing, as well as the spring? I can't seem to get it to fit. Many thanks indeed!

By MaidMarion - London - 25 August 2009
  • Hi! : The pin supposed to go through the hood, the plastic base and the spring. Just a tip remember the hood should be facing out, lock with the outside of the door. By goofy210668 - Edinburgh - 22 February 2010
  • The spring hoops should be aligned one each side of the latch. Then put into position in the door and slide the pin in. It can get a bit fidgety but does go. By moonshine - Norfolk - 25 September 2009
Answer this question
By bleu - - 22 August 2009
  • I did have the same problem, I use a screw driver between the plstic square left on the broken door and the washing and basically you are pushing the hood inside the door. The hood is the one keeping the door close. Hope this help! By goofy210668 - Edinburgh - 22 February 2010
  • Use a large screwdriver to push the mechanism in and the door should pull open. Might help if someone else pulls the door open. By moonshine - Norfolk - 25 September 2009
Answer this question

I can't see how I can remove the existing broken handle... also cant see how I would insert the pin of the new one...do i need to take the whole door off?

By Clueless - - 22 February 2009
  • You need to take all the door out of the machine, But remember to take pictures of the assemble before doing it! specially when you open the door. Door out of the hinge that keep it on the washing machine. 2-The door have a lid, that you need to open. Once it is open take a picture before taking anything out!, really you need to do that!. Good luck! By goofy210668 - Edinburgh - 22 February 2010
  • Open door, remove small phillips screws from inside of door plate. pull front plastic door away from glass anr rear section (door partly closed to allow seperation at hinge point)Handle assemblly is located in removed section. Using small screwdriver slide locating pin down and remove with longnose pliers. Slide out door handle and spring from front of door panel taking note of position and location of spring and catch direction. Remove and replace following directions in reverse making sure you have tension on the spring before sliding pin through all parts ribed end of pin last. (good luck) By ces45 - dundee - 13 March 2009
Answer this question

Does anybody have a photo of the handle before it was dismantled to be changed for a new one ,I forgot to take one and I am struggling to fit the new handle .thank you

By Pj - S.wales - 06 November 2016
  • Chris from eSpares
    Chris at eSpares says...

    See the video attached for details.

Answer this question
By erica - oxford - 14 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    Follow the links from the top of the page or go to: http://www.espares.co.uk/search/ma805pt1732/washing-machines/hinges/indesit

Answer this question
See all questions and answers

Will this part fit my appliance?

Check Now

White Washing Machine Door Handle Kit

8.15
(inc. VAT)
8.15