Refrigerator Control PCB Module Stock Number: ES1247946
Genuine spare part for select models of Beko and Blomberg fridge freezers
I have a beko cda659fs/1 fridge freezer. The freezer is fine but the fridge is not cold at all. Thermostat has been turned to max and still warm, seal has been replaced. What could the issue be please? 1 Answer
I have ensured there is enough space behind the fridge and the fan is switching on and light off when the door is shut.
-
Dean at eSpares says...
Check the defrost heater in the freezer is working as it may not be supplying air flow into the fridge, for more information to help see our advice centre. Just copy and paste into your browser http://www.espares.co.uk/advice
Fridge and freezer not working at all just clicking down at compressor.
-
Parminder at eSpares says...
We believe the clicking sound could be due to a faulty overload capacitor, clogged condenser coils, faulty condenser fan or a fault with the control board.
Model CDA543 f-1 The motor runs but there is no cooling in fridge or freezer.Is this a PCB fault ? 1 Answer
-
Chris at eSpares says...
If the compressor at the back is running but the black condenser radiator is not getting warm it would suggest the machine has lost its gas. This would need a refrigeration systems engineer to repair the problem.
i need to replace the main pcb where can i find it ?
-
Chris at eSpares says...
The PCB Stock Number: ES1247946 is found behind a cover at the top on the back of the appliance.
beko cf64 s the fridge part keeps over frosting i think it,s the pcb how many pcb,s are fitted and which one would be correct one many thanks andy 1 Answer
-
Chris at eSpares says...
The control board is Stock Number: ES1247946 If this does not solve the problem it is likely to be the sensor that is foamed into the lining. Unfortunately this sensor is not designed to be replaced.
-
Chris at eSpares says...
The sensor is likely to be faulty but cannot be replaced as it is in the insulation behind the wet all of the appliance.
My Beko CF6914s fridge is freezing at back, top half and freezing food. Is this what I need to fix it?if so is it an easy job to do? 1 Answer
-
Chris at eSpares says...
If the fridge is not auto defrosting and over freezing it may be this or a faulty sensor which=h cannot be replaced.
my fridge freezer keeps freezing up in the fridge and freezing the food i have cleaned the fridge several times now but keeps freezing can you what it may be
-
Chris at eSpares says...
This is fitted at the back near the top in the lining behind a plastic cover.
-
Chris at eSpares says...
At the top on the rear there is a plastic cover held by two screws. This board is behind.
Fridge part of fridge freezer is too cold...milk is frozen....have turned it to min there is also build up of frost even though it is supposed to be frost free 1 Answer
model is BEKO CF 64 S do you think I should replace both PCB's
-
Chris at eSpares says...
It is normal for a light frost to appear. Your freezing problem is either the pcb or the sensor (cannot be changed) so try the pcb.
Will this part fit my appliance?
Check Now