Universal 4-Sided Oven Door Seal Kit - 2m (For Square Corners) Stock Number: ES131929
Cut to size door seal suitable for select sized ovens
because i need oven side door seal? (cannon winchester)
- oven door seal ,2 fixings each corner. also 1 off white oven control knob for Cannon 'Winchester gas cooker oven.
- My oven is a modern one and it fitted perfectly
- i bought it for the oven side but on other models maybe fited to the door
- No adhesives just clips
- See if the seal is anchored at each corner. If so the fixing is probably mechanical and not adhesive.
-
Parminder at eSpares says...
This universal door seal is designed to fit most modern ovens that have a four sided seal with square corners and one hole in each corner. Please see our advice centre for more information: http://www.espares.co.uk/advice/1/1338/
The replacement seal is for the small oven. Replacement for exact part not found. Is this comparable?
-
Chris at eSpares says...
This seal can be fitted on most ovens as a replacement so is likely to fit but we do not have information on your model. If you would like us to try and order the original seal please raise a part enquiry from the link Help Me Find The Part I Need below.
-
Chris at eSpares says...
Check the total needed is less than 2 metres, if longer use two kits.
Good morning, the built in oven is just marked Synergie no model number, will this seal be ok ? thanks , Roy 1 Answer
-
Chris at eSpares says...
To source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.
I am considering purchasing this for an old oven, but I would like to know the dimensions to ensure that the door will close.
-
Chris at eSpares says...
Unfortunately we are unable to provide the dimensions of this part. The parts listed on our website are all model and serial number dependant (apart from universal parts). In order for us to locate the correct spares for your appliance we would need the model information requested. Without this we cannot guarantee that the part ordered will be the correct one for your appliance. If unsuitable return subject to our policy listed at: http://www.espares.co.uk/returns
Model number has disappeared. It is approx 20 cms on either side with the corners about 2 to 3 cms. This seal is kept in place by tiny spring clips
-
Chris at eSpares says...
In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.