Get The App From Play Store!

Skip to main content

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

BLACK FRIDAY EVENT use code BF25IE at checkout to SAVE 25% when you spend €35 or more excluding delivery.

Universal 40W E14 SES Oven Bulb Stock Number: ES654987

Universal bulb that fits most cookers that require an E14 40W bulb

Product Q&A

Ask a Question
By crilly - - 26 September 2009
  • Tried all of the tips below without success. Then went into the garage and took a pair of reinforced rubber gloves (the type that are a fabric material dipped in a rubber-type solution) and it unscrewed without hardly any effort. If you haven't got any, ask a friend or neighbour that messes around with cars or motorbikes and they'll probably have a pair you might borrow. By Top Tips Timmy - Coventry - 21 October 2018
  • Chris from eSpares
    Chris at eSpares says...

    See Stock Number: ES1123508 as check the reviews of this product as it makes a great difference.

  • Use this device its great, it is so easy you will wonder why it didn't come with oven; Neff Lamp Cover Remover Tool it can be bought from this site, this is the link http://www.espares.co.uk/reviews/cookers-and-hobs/neff/u1721n0gb%2F02/p/1092/1126/0/654787/1123507/lamp-cover-remover-tool.html?gclid=COuPlKCR0LYCFXDMtAodMUQAMw By Nickname - - 16 April 2013
  • Put your Marigolds on and persist! By Clickety Mick - Poole - 13 January 2011
  • Michael from eSpares
    Michael at eSpares says...

    Hi Crilly, We've had a lot of feedback on this issue and have since introduced a light cover removal tool. This should make the job a lot easier, see it here.

  • I guess this depends on the oven model. I recently replaced the bulb in our main (Neff) oven. The glass cover unscrewed though it was a little tight to shift at first. The bulb is also a screw fitting and is quite recessed in its housing. It's just possible to get enough grip on the glass to unscrew it. The whole task took a couple of minutes to complete. No tools required. By MrBodgeit - Chester - 01 November 2009
  • If located at the top rear right hand side you should be able to unscrew the lamp cover by turning it anti-clockwise. To prevent damage place a towel into the oven bottom. These can be really stubborn - if no good with the oven cold, try warming it up to say 70 degrees C and allow it to cool a little and while still warm try removing again. Neff's call centre suggest vinegar to help loosen it. By Dizco - Bristol - 26 October 2009
Answer this question
By Roger Hessing - Aberdeen - 07 March 2016
  • Hi Roger. I have exactly the same Neff pyrolitic oven as you. Today, I removed my bulb (it lasted just over 4 years from when oven new), and it said on it 300 degrees C, so I have just ordered 2 of these bulbs. By Bill - High Wycombe - 18 November 2018
  • That doesn't answer the question. My replacement bulb has just failed and I suspect that their life is dramatically shortened due to the very high temperatures used in self-cleaning ovens. The answer may be to temporarily remove the bulb before commencing a self-clean programme. By RAG - LONDON, - 18 March 2017
  • Chris from eSpares
    Chris at eSpares says...

    This is a 300C rated lamp.

Answer this question
By Beryl - Liverpool - 06 March 2009
  • in our Neff oven, between 3 and 6 months. The first time the bulb went I thought it must have been a faulty bulb, but we've got through 4 bulbs in the past year. I always buy them at least two at a time now. By nick - camberley - 28 December 2012
  • They seem to last about two years thats when i last change one. By rowman - London - 07 April 2009
Answer this question
By LC - Charente - 21 January 2018
  • Chris from eSpares
    Chris at eSpares says...

    We think Stock Number: ES1541143 is likely to be more suitable.

Answer this question

The light bulb i have removed from my oven looks slimmer than the one in the picture. The diameter of the lamp cover is 3.5 cm / less than 1.5 in. Does anyone know the size of this light bulb please? Thanks

By Oana - London - 30 December 2015
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

oven bulb has broken. The glass bulb has separated from the metal screw leaving this still in the oven bulb fitting. How do you replace it ?

By Derek J Richardson - Market Weighton, York - 30 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    With the power disconnected using strong gloves and safety glasses try wrapping a cloth around the end of a suitable stick to push into the bulb and turn it to unscrew it from the holder.

Answer this question

I also need to know that if the light bulb has broken and come away form the metal how do I get out? Many thanks

By MG - Channel Islands - 08 November 2015
  • Chris from eSpares
    Chris at eSpares says...

    We believe this is suitable for your oven.

Answer this question
By Diana horwood - waddington lincoln. - 14 May 2015
  • Chris from eSpares
    Chris at eSpares says...

    In order for us to answer your question or source the exact part you require please provide us with the following information: Appliance make, model and serial number of your appliance. For further help visit the "Finding Model Numbers" page on our website here: http://www.espares.co.uk/findingmodelnumbers. Alternatively please copy and paste this link into your web browser.

Answer this question

removed old lamp do not remember a lamp cover

By Anonymous - de13 9ql - 12 November 2014
  • Chris from eSpares
    Chris at eSpares says...

    The cover should be replaces as fat, grease and cleaning compounds may get into the connections and cause the holder to fail. The cover is not likely to be available on its own but if you order the complete lamp you may be able to just transfer the cover on to the oven.

Answer this question

Does this come with the bulb cover remover?

By Chris - Brighton - 15 October 2014
  • Chris from eSpares
    Chris at eSpares says...

    If you have a Bosch Neff or Siemens oven and require the fitting tool see Stock Number: ES1123508

Answer this question

Universal 40W E14 SES Oven Bulb

5.43
(inc. VAT)
5.43